蔺诗韵

 

姓名：蔺诗韵

职称：讲师

邮箱：linsy@cqjtu.edu.cn

蔺诗韵，中共党员，工学博士，毕业于重庆大学力学专业。主要从事复合材料结构设计与力学性能研究工作，研究领域包括连续纤维3D打印、仿生复合材料设计与制备、多尺度仿真分析以及等离子体表面改性等。主持重庆市教委项目1项，横向项目4项，在《Carbon》《Engineering Failure Analysis》《Journal of the Mechanical Behavior of Biomedical Materials》《European Journal of Mechanics - A/Solids》等期刊发表SCI论文20余篇，授权发明专利3项。主持重庆市一流课程1门，校级教改2项。

[1] 仿生结构设计与力学性能研究；[2] 热塑/热固3D打印增材制造；[3] 复合材料热-力耦合仿真研究

[1] 含热冲击损伤的陶瓷基复合材料剩余强度与剩余寿命研究，2025，参与

[2] 某型智能底座前脸总成技术开发及加工，2024，主持

[3] 飞机三维电子样机设计咨询服务，2022，主持

[4] 基于分形的裂纹扩展三维空间模型和渐进损伤有限元仿真研究，2020，重庆市教委，主持

近三年部分论文如下

[1] Lin, S*, Jie D, Bai J, Ran M, Li Y, Du Y, et al. Heat Treatment Temperature Effects on Three‐Point Bending of 3D‐Printed Onyx/HSHT Fiberglass Honeycomb Composites. Polymer Composites. 2026.

[2] Ran M., Lin, S*., Peng C, Jie D., Du Y., Yin D., Fractal-inspired negative Poisson's ratio composite honeycombs for enhanced energy absorption[J], Carbon, 248.2026,121183.

[3] Lin, S*, Jie D, Ran M. Influence of temperature on the compression performance and failure modes of PETG-CF honeycomb structures. Journal of Thermoplastic Composite Materials. 2026.

[4] Jie D, Bai J, Ran M, Zhang J, Luo C, Lin, S*. Mechanical Behavior and Fractal Analysis of 3D Printing Biomimetic Elliptical Porous PLA Structures. Journal of Applied Polymer Science. 2026;143.

[5] Jie D, Bai J, Du Y., Dong Y., Ran M., Luo T., Yin, D，Lin, S*. Regulating Mechanical Behavior of Onyx Hexagonal Honeycombs via Heat Treatment: A Thermo‐Mechanical Study[J]. Polymer Composites, 2025;47:3665-81.

[6] Lin, S*., Ran M., Jie D., Yin D., Fractal Analysis and Mechanical Characterization of 3D‐Printed Concave Hexagonal Structures With Negative Poisson's Ratio[J], Fatigue & Fracture of Engineering Materials & Structures, 2025;48:2821-33..

[7] Lin, S*, Ye B, Peng C, Ran M, Jie D, Du Y, Yin D. Enhancing interfacial bonding and mechanical properties of CF/EP composites through low-temperature jet plasma treatment[J]. International Journal of Adhesion and Adhesives, 2025, 141.

[8] Jie D, Bai J, Ran M, Yin, D，Lin, S*. Bending performance and crack propagation in biomimetic honeycomb structures for sustainable lightweight design[J]. European Journal of Mechanics - A/Solids, 2025, 112.

[9] Lin, S*, Zhang J, Peng C, et al. Exploring anisotropic mechanical properties of lobster claw exoskeleton through fractal models[J]. J Mech Behav Biomed Mater, 2024, 159:106699.

[10] Lin S*, Peng C, Deng F, Yin D, Ye B. Influence of structural geometry on tensile properties and fracture toughness in 3D printed novel structures[J]. Engineering Failure Analysis, 2024, 161.

已毕业硕士研究生3名，在读硕士研究生5名。